renewalble
  • 1 (2)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 9
  • fans
  • 2 (1) copy
  • 4 (1) copy
  • Agrawal Renewable Energy-3
  • b copy
Agrawal Renewable Energy Private Limited (AREPL) has been formed in 2011, for taking-up the Green Energy Projects initiative as a key area of growth and focus.
In extension of the group’s interest to invest in Renewable Energy Projects, Agrawal Renewable Energy Private Limited (AREPL), plans to start grid connected and off grid solar power projects in the states of Rajasthan, Maharashtra, Madhya Pradesh and Gujarat, for which major land has already been acquired.
Agrawal Renewable Energy Private Limited (AREPL) aims to bring solar energy systems and solutions, to all rural & urban areas and bring about a revolution in the quality of life.
As a responsible corporate citizen, Agrawal group has a keen interest in renewable energy projects and seriously focused in taking up environment friendly projects and product manufacturing facilities.

 

Agrawal Renewable Energy Private Limited into Wind Power Sector -
To focus particularly on Renewable Energy we have 14.7 MW wind power installation in Jath, Maharashtra. The project consisting of Suzlon make 7 WTGs of 2.1 MW capacity. This project is also registered with IREDA in Generation Based Incentive (GBI) scheme.
We have got commissioning of this project in June 2012.

 

Agrawal Renewable Energy Private Limited into Solar Power Sector –
We offer unrivalled breadth and depth of products and integrating technologies under solar sector as follows:

1.Solar PV panel manufacturing

Agrawal Renewable Energy Private Limited (AREPL) provides an optimum and clean solution for electricity generation from Solar PV modules, AREPL has in-house 30 MW line of module manufacturing facility incorporating on fully automated Italian imported plant and technologies and offers standards & custom design modules. The unique, fully automated production process ensures highest level of precision and consistent production quality. Modules are manufactured in clean and dust free environment and are designed to sustain harsh environmental conditions. We use only the best raw materials procured from renowned suppliers’ worldwide to ensure a quality end product.

Features of DHOOP series PV Module

  1. Technology – Multi Crystalline Silicon Solar Cells
  2. Wide range of modules from 3 Wp to 300 Wp
  3. IEC 61215, IEC 61730 and IEC 61701 certified.
  4. State of the Art Automated Manufacturing Facility
  5. Positive power tolerance of modules
  6. Raw Materials of highest quality
  7. Weather proof junction box with easy interconnection arrangement.
  8. Anodized aluminum frame

Module Technical Specification

Model No.

No. of cells

Module Dimensions (mm)

Module Wattage

Voc       (Volt)

Isc            (Amps)

Vmax (Volt)

Imax (Amps)

Download Data Sheet

Dhoop 0603

18

200 x 185 x 22 06V,03Wp

10.5

0.37

8.2

0.37

Dhoop 0605

18

300 x 185 x 22 06V, 05Wp

10.5

0.62

8.2

0.61

Dhoop 1205

36

300 x 185 x 22 12V,05Wp

21

0.31

16.4

0.31

Dhoop 1210

36

305 x 340 x 22 12V,10Wp

21

0.62

16.4

0.61

Dhoop 1220

36

500 x 340 x 22 12V,20Wp

21

1.24

16.4

1.22

Dhoop 1237

36

610 x 655 x 34 12V,37Wp

21

2.32

16.4

2.26

Dhoop 1250

36

610x 655 x 34 12V,50Wp

21

3.14

16.4

3.05

Dhoop 1275

36

890 x 655 x 34 12V,75Wp

21

4.72

16.4

4.6

Dhoop 12120

36

1325 x 655 x 42 12V,120Wp

21

7.6

16.4

7.32

Dhoop 200

60

1662 x 992 x 42 24V, 200Wp

36

8

29

6.91

Dhoop 210

60

1662 x 992 x 42 24V,210Wp

36.2

8.2

29

7.26

Dhoop 220

60

1662 x 992 x 42 24V,220Wp

36.5

8.45

29

7.59

Dhoop 230

60

1662 x 992 x 42 24V,230Wp

36.7

8.62

29

7.93

Dhoop 240

60

1662 x 992 x 42 24V,240Wp

37

8.8

29

8.28

Dhoop 250

60

1662 x 992 x 42 24V,250Wp

37.2

8.85

29

8.63

Dhoop 280

72

1950 x 992 x 45 30V,280Wp

44

8.9

36

7.78

Dhoop 300

72

1950 x 992 x 45 30V,300Wp

44.4

9.2

36

8.33

Applications – The DHOOP Series Solar PV modules are used for Solar Appliances, Solar Water Pumping Systems, Off-grid rural applications, Grid connected systems, Roof-Top Systems, Telecom sites, etc.

Use nature; use AREPL to cater to all your power needs.

2. PV Projects (EPC work)

As a developer (EPC) contractor with an extensive network, we are geared toward private and institutional investors, as well as project developers and owners of large properties in India. We offer Rooftop and Ground mounted projects for off-grid as well as on grid systems.

We offer our services for –

  • Utility scale Solar Power Plants (Grid connected)
  • Roof Top PV solution (Off grid & Grid Interactive System)
  • Water pumping system
  • Home lighting System
  • Street Light etc.

Projects in Pipe line

    • 2 x 3.3 MWp Solar power project to be installed at Bap, Rajasthan.
    • 10 MWp Solar power project to be installed at Amravati, Maharashtra.
    • 100 KW rooftop solar power project at the roof area of Module Manufacturing unit, Goa.
    • 100 KW rooftop solar power project at the roof area of Medizest Pvt. Ltd., Goa (Pharmaceutical unit)

3. MNRE Channel Partner, Solar products and applications :

We are MNRE Channel Partner for developing solar power projects. We offer turnkey solutions for MW scale grid connected projects, rooftop projects, solar pumping systems, solar street home lighting and solar lanterns etc.

A solar-powered pump is a pump running on electricity generated by photovoltaic panels or the thermal energy available from collected sunlight as opposed to grid electricity or diesel run water pumps. The operation of solar powered pumps is more economical mainly due to the lower operation and maintenance costs and has less environmental impact than pumps powered by an internal combustion engine (ICE). Solar pumps are useful where grid electricity is unavailable and alternative sources (in particular wind) do not provide sufficient energy.

A photovoltaic solar powered pump system has three parts:

  • The pump
  • The controller
  • Solar panels.

solar-water-pump

It is a very cost effective & beneficial solution in places with irregular electric supply.




Executed Projects

 

Sr. no.

Installed capacity in Hp

Company name

Installed Location

1.

5 Hp

M/s. Matches Goa Pvt. Ltd.

Sacorda, Goa

2.

5 Hp

M/s. Sonepur agro pvt ltd

Bhabpur, Odisha

Solar street lights are raised light sources which are powered by photovoltaic panels generally mounted on the lighting structure. The photovoltaic panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.Solar street lights provide public lighting without use of an electrical grid; they may have individual panels for each lamp of a system, or may have a large central solar panel and battery bank to power multiple lamps.

To reduce the overall cost of a solar lighting system, energy saving lamps of either the fluorescent or LED lamp type are used, since incandescent bulbs consume several times as much energy for a given quantity of light.

Salient Features

  • Payback Period – 4.5 year
  • Available in CFL & LED light

street light



We offer following Solar Street Light model system

 

STREET LIGHT MODEL Solar Module Battery Nominal Power
DHOOP SL – 1 37 W 40 AH 6 WATTS
DHOOP SL – 2 37 W 40 AH 8 WATTS
DHOOP SL – 3 40 W 42 AH 12 WATTS
DHOOP SL – 4 45W 45AH 15 WATTS
DHOOP SL – 5 75W 75AH 18 WATTS

A solar lamp is a portable light fixture composed of an LED lamp, a photovoltaic solar panel, and a rechargeable battery. Outdoor lamps may have lamp, solar panel and battery integrated in one unit. Indoor solar lamps with separately-mounted solar panels are used for general illumination where centrally generated power is not conveniently or economically available. Solar-powered household lighting may displace light sources such as kerosene lamps, saving money for the user, and reducing fire and pollution hazards.

Solar lamps recharge during the day. Automatic outdoor lamps turn on at dusk and remain illuminated overnight, depending on how much sunlight they receive during the day.

Salient Features

  • Available in CFL & LED light
  • No electrical connection required
  • No dependency on grid availability
  • Easily portable since no cabling is required
  • Can act in the absence of power as emergency light.
  • No effects with Increase in fuel cost
  • Low Maintenance Cost
  • Energy Saving
  • Reduction in CO2 emission

new_solar_lantern

We offer following Solar lantern model

 

LANTERN MODEL Solar Module Battery  LUMINARY
DHOOP LT – 1 3Wp 4.5AH,6V 1WATTS
DHOOP LT- 2 3Wp 4.5AH .6V 2WATTS
DHOOP LT- 3 3Wp 4.5AH ,6V 3WATTS
DHOOP LT- 5 5Wp 4.5AH,12V 5WATTS
DHOOP LT- 7 12Wp 7AH,12v 7WATTS
DHOOP LT -7’ (CFL) 10Wp 7AH.12V 7WATTS
BATTERY PROTECTION LOW VOLTAGE CUT OFF,LOAD RECONNECT,OVERCHARGE CUT OFF,MODULE RECONNECT
ELECTRIC PROTECTION OVERCHARGE, NO LOAD, SHORT CIRCUIT, REVERSE POLARITY, REVERSE FLOW
A solar fan is a mechanical fan powered by solar panels. The solar panels are either mounted on the device or are installed independently. Solar fans mostly do not require secondary power sources other than solar power, as most of them are used for cooling purposes during day time. Some types are also used for heating purposes. It runs the fastest when it is the hottest outside providing savings on air conditioning costs.

We offer following Solar Fan model

Features –

  • No electrical connection required
  • No dependency on grid availability
  • Easily portable since no cabling is required
  • Fully cord less
  • Can be used 10 to 13 Hrs after full charge
  • No Risk of electric accidents
  • Affordable price

b

Turn Your Rooftop Into a Power Plant

Several cities and towns in the country are experiencing a substantial growth in their peak electricity demand. Municipal Corporations and the electricity utilities are finding it difficult to cope with this rapid rise in demand and as a result most of the cities/towns are facing severe electricity shortages. Various industries and commercial establishments e.g. Malls, Hotels, Hospitals, Nursing homes etc housing complexes developed by the builders and developers in cities and towns use diesel generators for back-up power even during the day time. These generators capacities vary from a few kilowatts to a couple of MWs. Generally, in a single establishment more than one generators are installed; one to cater the minimum load required for lighting and computer/ other emergency operations during load shedding and the others for running ACs and other operations such as lifts/ other power applications. With an objective to reduce dependency on diesel gen-sets, a scheme to replace them with SPV is being proposed. Further, in order to utilize the existing roof space of buildings, the scheme proposes to promote roof-top SPV systems on buildings to replace DG gensets installed for minimum load requirement for operation during load shedding. These loads are generally varying between 25 kW to 100 kW or so.

A roof top SPV system could be with or without grid interaction. In grid interaction system, the DC power generated from SPV panels is converted to AC power using power conditioning unit and is fed to the grid either of 11 KV three phase line or of 220 V single phase line depending on the system installed at institution/commercial establishment or residential complex. They generate power during the daytime which is utilized fully by powering the captive loads and feeding excess power to the grid as long as grid is available. In cases, where solar power is not sufficient due to cloud cover etc. the captive loads are served by drawing power from the grid. The grid- interactive rooftop SPV systems thus work on net metering basis wherein the beneficiary pays to the utility on net meter reading basis only. Ideally, grid interactive systems do not require battery back up as the grid acts as the back-up for feeding excess solar power and vice-versa. However, to enhance the performance reliability of the overall systems, a minimum battery-back of one hr of load capacity is strongly recommended. In grid interactive systems, it has, however to be ensured that in case the grid fails, the solar power has to be fully utilized or stopped immediately feeding to the grid (if any in excess) so as to safe-guard any grid person/technician from getting shock (electrocuted) while working on the grid for maintenance etc. This feature is termed as ‘Islanding Protection’
Non-grid interactive systems ideally require a full load capacity battery power back up system. However, with the introduction of advanced load management and power conditioning systems, and safety mechanisms, it is possible to segregate the day-time loads to be served directly by solar power without necessarily going through the battery back-up. As in the previous case of grid-interactive systems, minimum one hour of battery back-up is, however, strongly recommended for these systems also to enhance the performance reliability of the systems. The non-grid interactive system with minimum battery back are viable at places where normal power is not available during daytime. In case the SPV power is to be used after sunshine hours, it would require full load capacity battery back up.

A rooftop photovoltaic power station, or rooftop PV system, is a photovoltaic system that has its electricity generating solar panels mounted on the rooftop of a residential or commercial building. The various components of such a system include, photovoltaic modules, mounting systems, cables, solar inverters and other electrical accessories

Rooftop mounted systems are small compared to ground-mounted photovoltaic power stations with capacities in the megawatt range. Rooftop PV systems on residential buildings typically feature a capacity of about 5 to 20kilowatts (kW), while those mounted on commercial buildings often reach 100 kilowatts or more.

We offer following solar rooftop design

Sr. No. Systems Capacity Land Required (Sq Mtr) Project Type
1 10kW 100-150 Rooftop / Ground Mounted
2 50 kW 500-600 Rooftop / Ground Mounted
3 100kW 1000-1200 Rooftop / Ground Mounted
4 Customized design as per requirement

Applications: for diesel abatement in Institutions, Govt. Buildings, Commercial establishments e.g. Malls, Hotels, Hospitals, Nursing homes, Industry & Housing complexes facing huge power shortage during daytime.

Benefits

  • Will pay back the cost in 5 to 6 years
  • Life : 25 to 30 years
  • No air and noise pollution
  • No moving parts and zero maintenance except cleaning of SPV panel once in a while
  • Beneficiary to decide supplier on cost and quality competitive basis. List of suppliers available at Ministry’s website
  • battery back up system are also useful where normal power is not available during daytime and after sunshine hours.
  • A 100 kW capacity Roof Top system could save around 50,000 liters of diesel per year

Agrawal

A solar power pack is an off-grid power source, which is meant to deliver clean power continuously. It is meant to be a direct replacement to diesel powered generator sets. We design systems in various configurations to suit clients power requirements, capital budgets, local renewable resources whilst minimizing O&M to provide the best financial option with maximum power availability

For example Home lighting etc.
We support our customer with our expertise right from Design, Manufacturing and Installation & Maintenance.

Agrawal Renewable Energy Private Limited (AREPL) is committed for – quality product & solution, timely delivery, cost effectiveness & total consumer satisfaction.

Scroll to Top